Showing posts with label General Motors. Show all posts
Showing posts with label General Motors. Show all posts

Tuesday, October 10, 2017

1932 Chevrolet Confederate sedan
 


 
 
Given today’s poetically correct social environment, many people will likely be surprised to learn that in 1932, Chevrolet Division of the General Motors Company marketed its new BA series car as the “Confederate.” Chevrolet advertised that the Confederate had “V-16 styling at a six cylinder price" and emphasized that it was the "Great American Value."
 
The Confederate series encompassed fourteen different body styles and a total of 313,395 were built in five factories across the United States during the 1932 sales year.
 
Notice the Chevrolet Spark passing in the background
 
The wire mesh grille was standard
The chrome louvers on the hood dual spare tire side mounts and cowl lights on this car which was seen at the “Autos of Alamo” car show identify it as a Confederate Special sedan.
 
 





 The Confederate rides on 18-inch true spoke wire wheels.
 
 
 
 
The Confederate series was powered by the trusty 194 cubic inch 60-horsepower (up 10 from 1931) “Stovebolt Six” engine connected to the all-new three-speed “Silent Synchro-Mesh” transmission and the "Simplified Free Wheeling" mode was standard, which permitted the car to coast when the driver's foot was lifted from the accelerator via an over-running clutch, that disengaged the driveshaft from the output shaft.
 
 
 

This beauty is very well-equipped fitted with the dual front "Town and Country" horns, dual rear-view mirrors, luggage racks, front and rear bumpers and the optional passenger side brake and parking light. All of these options that could have been added either at the factory or the dealership.    
 
After one year of disappointing sales with many sales lost to the new V-8 Ford,  the Confederate  was replaced for 1933 by the CA series sold as the "Eagle" and "Master" which when combined sold 140,000 more units than the 1932 Confederate.  
 
All photos by the author

Monday, April 10, 2017


1940 LaSalle 1940 5027 2-door coupe
 
 

As early as 1923 General Motors (GM) President Alfred P. Sloan developed the concept of the GM Companion Make Program to fill gaps he perceived in the General Motors product portfolio. General Motors sales executives referred to what Sloan created as “The Ladder of Success.” As a man (or woman) became more financially successful, they would work their way up the ladder to the pinnacle for GM, the purchase of a Cadillac.

In general, the “companion make” was built and marketed alongside the parent brand but was priced lower than the parent automobiles (except in one case). Chevrolet was designated as the entry level product line for GM, followed in ascending order followed by the new-for-1926 companion make, Pontiac, then its parent brand, Oakland which had been part of General Motors since 1909.   

Next on the GM hierarchal parade came Oldsmobile then its higher priced companion Viking  which was officially sold for two model years 1929 and 1930, although 353 1931 Vikings were built with leftover 1930 parts. The next step up for the GM buyer was the revived Marquette nameplate (dead since 1912) which sold from 1929-1931 as the lower cost companion to Buick. Above the Buick was the Cadillac “companion make” LaSalle which was sold from 1927 to 1940, and ultimately, the Cadillac. Topping the General Motors universe of makes was

LaSalle took its name from the French explorer Robert Cavelier de La Salle who explored from the Great Lakes to the Gulf of Mexico beginning in 1673 and claimed the entire Mississippi River basin as “Louisiana” for the King of France before his men mutinied and killed him in 1687.
 
The 1927 LaSalle Pacemaker is shown in this photo
from the Indianapolis Motor Speedway Collection
in the Center for Digital Studies in the IUPUI University Library
 

LaSalle was selected to provide the “Pacemaker” for Indianapolis 500-mile race on three occasions. In 1927 the LaSalle V-8 Series 303 roadster was driven by former race car driver Willard “Big Boy” Rader who had appeared in two of the first four Indianapolis 500-mile races as a relief driver.  


Willard "Big Boy" Rader seated in the Lasalle Official Pacemaker 
courtesy of the Indianapolis Motor Speedway  
 
 A month after the ‘500,’ Rader drove a similar stripped-down LaSalle 303 roadster on a timed test at the nearly 4-mile concrete oval at the GM Milford test track. The car fitted with an optional high-compression cylinder head was completely stock stripped of its headlights, running boards, windshield and fenders covered 952 miles in ten hours before a broken oil line stopped the run. 
 
The 1934 LaSalle Pacemaker is shown in this photo
from the Indianapolis  Motor Speedway Collection
in the Center for Digital Studies in the IUPUI University Library
 
Ralph DePalma is shown in the 1934 LaSalle Pacemaker in this photo
from the Indianapolis Motor Speedway Collection
in the Center for Digital Studies in the IUPUI University Library
 

In 1934 the new LaSalle straight eight-powered Model 350 convertible styled by Harley Earl and driven by Rader (who had driven the 1931 Cadillac Pacemaker) was the Official Pacemaker for the Indianapolis 500-mile race.  In 1937 a LaSalle Series 37-50 convertible coupe served as the Official Pacemaker piloted by the recently retired Raffaele “Ralph” DePalma the 1915 Indianapolis 500 mile race winner.

Over time the General Motors companion make strategy was abandoned mainly due to the automotive sales slump created by the Great Depression. As mentioned above, the Viking and Marquette makes were short-lived and the Oakland nameplate was killed in 1931 but its companion make Pontiac lived on until 2010.

LaSalle built some outstanding automobiles, but sales were never brisk. After a peak number of 22,691 cars were sold during the 1929 sales year, three years later sales dropped to a low of 3,290 cars. The strikingly restyled 1937 LaSalle broke all previous sales records with 32,000 units sold through the model year.  Following a dip in 1938 model year sales to just 15,501 units, the LaSalle was restyled again for 1939 and sales rebounded to 23,032. 

For 1940, the LaSalle was redesigned for the second year in a row, this time by William Mitchell head of the Cadillac Studio. LaSalle sold two distinct models in 1940 - the series 50 and the series 52, which was referred to in Cadillac sales literature as “the Special.”  Both the series 50 and 52 LaSalle rode on a 123-inch wheelbase chassis with a 59-inch track and 7 x 16-inch wheels  powered by an L-head, cast iron block V-8 engine that displaced 322 cubic inches and fitted with twin Carter carburetors developed 130 horsepower.
 
 
The 50 series featured an Art Deco hood ornament, streamlined headlamps integrated into the fenders, three side hood louvers and a split front windshield.   The Series 52 had a wider, 45-degree sloping windshield, a larger curved rear window, no belt-line molding, a rounder, smoother line down the rear of body and was 3-3/4 inches longer overall.  To show how automotive design was changing during this period, running boards were a offered as a “no cost” option. A 1940 LaSalle came standard equipped with three chromes strips at the bottom of the body which added to the sleeker lower look.

For the 1940 model year Cadillac and LaSalle offered seven models with a total of 51 distinctly different cars with pricing that began at $1000 and topped out with the magnificent Cadillac Sixteen of which only fifty were built at a price of over $6000.  LaSalles came standard with “Hi-Test Safety Plate Glass” advertised as providing a clearer view than laminated glass and Cadillac “Controlled Action Ride” with improved knee-action suspension which when combined with thick foam rubber padded cushions on the seats made them “America’s finest riding cars.”  

All 1940 LaSalle bodies featured a one-piece solid steel “turret top” reinforced with steel roof bows and roof rails welded to the inner steel body framework. LaSalle advertised that the fully-welded bodies were “insulated at every point for quietness and comfort;” the top, door panels and floor were insulated with thick asphalt impregnated felt while the dash and cowling area was covered with heavy jute matting and Celotex ™ board (asbestos impregnated fiberboard). 

Heavy rubber pads surrounded the body bolts to “eliminate body rumbling inherent with cars with single unit frames” and were effectively weather sealed to “prevent the entry of dust water and drafts.” Steel drip moldings, a long-lost feature on modern cars, were furnished to “prevent annoying water from dripping on passengers entering or leaving the car.”
 
 
 

This car, a model 5027 2-4 Coupe owned by Marshall Krause was on display at the 2017 Sacramento Autorama. With an original list price of $1180 there were 1,525 LaSalle 5027 2-4 coupes sold during the 1940 model year. This car which has been completely restored is powered by a non-original engine which was bored out to a displacement of 346 cubic inches using period-correct Cadillac rebuild specifications by Top of The Hill Performance Center in Livermore, California.
 
 

The car as shown is equipped with optional amber lenses fog lights  which sold for $14.50 in 1940 for the pair installed, a rear view mirror ($4.50 installed), a grille guard ($10.00 installed) and chrome wheel  trim rings which sold for $1.50 each installed. This example recently was offered for sale at the end of January 2017 on the internet auction site http://bringatrailer.com/ but was a no-sale as the highest offer of $35,000 did not meet the seller’s reserve. Perhaps serious LaSalle enthusiasts held back on bidding since the car is finished in a PPG Paints Tan, a color which was not offered on the standard 17-color LaSalle palette for 1940.

1940 Series 50 model year sales ended with 10,382 cars sold and with Series 52 production factored in, LaSalle was 15th overall in US auto sales with a total of 24,133 cars sold for 1940.  Although 1940 was Lassalle’s second highest sales year ever, it wasn’t enough as the marque was killed by General Motors in the summer of 1940 although there were three possible new 1941 designs in the midst of development.

The LaSalle nameplate was briefly resurrected in 1955 for the General Motors Motorama shows with two LaSalle II concept cars. Both used fiberglass bodies; the first design was a small four-door hardtop sedan while the other was a truncated two-seat convertible roadster. Both cars which were non-running examples with V-6 aluminum engines castings under their hoods, shared the same vertical grille opening design reminiscent of the 1940 LaSalle.

Color photos by the author.

Sunday, February 12, 2017


F-9A Diesel-electric locomotive



Today we share something completely different  - a General Motors Electro-Motive Diesel, Inc. (EMD) model F-9A diesel electric locomotive which painted in the dark green and yellow colors of the Spokane, Portland and Seattle Railway (SP&S RR) displayed on the grounds of the Columbia Gorge Interpretative Center Museum near Stevenson Washington.



Click to enlarge this cutaway F9 drawing from a GM brochure

The locomotive has a 4 foot 8 1⁄2 inch gauge, 40 inch wheels and is 50 feet 8 inches long, 10 feet 8 inches wide and stands 15 feet tall.  Depending on gearing a F-9A locomotive could attain a top speed of105 miles per hour with a 21-tooth pinion and 56 tooth axle gear. With a total weight of 258,000 pounds fully fueled with 1200 gallons of fuel oil  200 gallons of cooling and 230 gallons of oil  water the locomotive's center of gravity was 63 inches above the rails.

A schematic from the F9 Operating Manual

EMD began production in early 1954 as one of the final first generation models of the series 16-cylinder model 567C 45 degree V-type two-stoke diesel that displaced 567 cubic inches  per cylinder, with a 8-1/2 inch bore and 10 inch stroke for a total of 9,072 cubic inches that could produce a hefty 1,750 horsepower at 800 revolutions per minute (RPM). The engine sat backwards in the locomotive with generator just behind the cab.  

A direct current (DC) 600 volt generator powered four D37 traction motors one on each powered axle to produce 40,000 pounds of continuous tractive effort and 56,500 pounds of starting effort. In addition an alternator supplied AC power for cooling fans and blowers. Three levers - selector, throttle and reverse - and two brake air valve handles controlled the operation of the locomotive. The F-9A Operating Manual encompassed 534 pages.

Just 100 F9As were built at the EMD La Grange, Illinois plant before production ended in the spring of 1960. This unit was one of 39 purchased by the Northern Pacific railroad between 1953 and 1956; Northern Pacific was the largest single purchaser of the 18 railroads that bought EMD F-9A locomotives.  


This locomotive is painted as one which met passengers from the North Coast Limited which ran 1892 miles from Chicago’s Union Station to Seattle’s King Street Station. The North Coast Limited could typically make the run from Chicago to Seattle in just less than two days or 46 hours, and was renowned for its excellent food and the Vista Dome cars for panoramic viewing as the train ran through Yellowstone National Park. The National Railroad Passenger Corporation (Amtrak) discontinued service on the North Coast Limited line on October 1, 1979

Passengers headed to Portland Oregon disembarked the North Coast Limited and embarked on the Spokane, Portland and Seattle Railway Route #1 at Pasco Washington which passed through Stevenson Washington on tracks adjacent to the Columbia River which can be overlooked from the Center’s property.  

In March 1970 Northern Pacific, Great Northern, the Chicago, Burlington and Quincy Railroad and the Spokane, Portland and Seattle Railway merged to form Burlington Northern which purchased the Atchison, Topeka and Santa Fe Railway in 1996 to form the Burlington Northern and Santa Fe Railway. Later renamed BNSF the corporation was purchased by Warren Buffett’s Berkshire Hathaway in 2009.

BNSF donated this F-9A car body (no mechanicals) to the Columbia Gorge Interpretative Center Museum which has completed the exterior and cab restoration. The Museum hopes someday to complete the interior restoration and use the locomotive as the basis of a virtual reality exhibit. Check out Museum’s website at http://www.columbiagorge.org/
Photo by the author